20120911, 09:12  #133  
Banned
"Luigi"
Aug 2002
Team Italia
4830_{10} Posts 
Quote:
Please, Luigi 

20120911, 12:35  #134  
Romulan Interpreter
"name field"
Jun 2011
Thailand
23105_{8} Posts 
Quote:
(finished for MM107, I saw it is already marked on the list as finished, and partially done for the mm61, split in two semiranges, each semirange split in  now 11 remaining  parts, each part would take about 9 hours and half on a gtx580 a bit overclocked and water cooled :D). Code:
[Tue Sep 11 07:35:46 2012] no factor for MM61 from 2^114 to 2^115 (k range: 5000T to 5100T) [mmff 0.21 mfaktc_barrett120_M61gs] [Tue Sep 11 05:44:13 2012] no factor for MM107 from 2^155 to 2^156 (k range: 0T to 200T) [mmff 0.21 mfaktc_barrett160_M107gs] [Tue Sep 11 15:25:08 2012] no factor for MM61 from 2^114 to 2^115 (k range: 6300T to 6400T) [mmff 0.21 mfaktc_barrett120_M61gs] [Tue Sep 11 19:24:53 2012] no factor for MM61 from 2^114 to 2^115 (k range: 5100T to 5200T) [mmff 0.21 mfaktc_barrett120_M61gs] 

20120911, 13:31  #135 
"Jerry"
Nov 2011
Vancouver, WA
1,123 Posts 

20120911, 13:50  #136 
Jun 2003
3·17·101 Posts 
This project could use a boinc setup. [Not volunteering!]

20120911, 20:32  #137 
Dec 2003
Paisley Park & Neverland
185_{10} Posts 
Is "FermatFactor=127,3700000e9,4000000e9" the correct worktodo entry for the reservation of: 127 3,700,000,000,000,000 4,000,000,000,000,000 ?
I'm a bit confused with your k, N, and things... ;) 
20120911, 20:45  #138 
Apr 2012
993438: i1090
92_{16} Posts 
Yes or
FermatFactor=127,3700e12,4000e12 ;) 
20120911, 23:55  #139 
Sep 2008
Kansas
3449_{10} Posts 
It looks like this is still available so I would like to reserve it.
Code:
MMFactor=127,2.5e15,2.8e15 
20120912, 04:15  #140  
"Jerry"
Nov 2011
Vancouver, WA
1,123 Posts 
Quote:
Quote:
Last fiddled with by flashjh on 20120912 at 04:42 

20120912, 05:12  #141  
Dec 2011
10001111_{2} Posts 
Quote:
MMFactor work.run under mmff0.20 is OK. FermatFactor work run under mmff0.20 should be discarded. The interpretation of the FermatFactor line has changed: Code:
mmff0.20: FermatFactor=<N2>,low,high Code:
mmff0.21: FermatFactor=N,low,high If you got reservations while using the old (0.20) version of mmff, you had to tweak the N value, by subtracting 2. To move that reservation to the new (0.21) version of mmff, you must undo your tweak. 

20120912, 05:16  #142 
Romulan Interpreter
"name field"
Jun 2011
Thailand
97×101 Posts 
"Reservation" means "N range, k range". The "+2" is there already. The correct one is 127....
This is what the site use, and the new software version. This can find factors of Fm with m<=125. Usually N>=m+2. The older version of the program would have had to reserve the same range as "125....". So, please do not use 129! 
20120912, 07:17  #143 
Jul 2003
So Cal
2·7·157 Posts 
Code:
no factor for MM107 from 2^155 to 2^156 (k range: 200T to 300T) [mmff 0.21 mfaktc_barrett160_M107gs] no factor for MM107 from 2^156 to 2^157 (k range: 0T to 300T) [mmff 0.21 mfaktc_barrett160_M107gs] 
Thread Tools  
Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
Mersenne trial division implementation  mathPuzzles  Math  8  20170421 07:21 
trial division over a factor base  Peter Hackman  Factoring  7  20091026 18:27 
P95 trial division strategy  SPWorley  Math  8  20090824 23:26 
Trial division software for Mersenne  SPWorley  Factoring  7  20090816 00:23 
Need GMP trialdivision timings  ewmayer  Factoring  7  20081211 22:12 